Connect The Printer To A Wireless Network - Honeywell Intermec PD43 User Manual

PD43 and PD43c Commercial Printer User Manual

Connect the Printer to a Wireless Network

Before you begin, you should be familiar with the settings you need for
your network.
If you are using a DHCP network, turn the printer on. The printer
automatically connects to the wireless network.
For a printer with the LCD interface, the Wi-Fi Connection icon shows
the status of the connection.
Ready
Fingerprint
10.200.27.89
Wi-Fi Connection Icon on LCD Interface
For a printer with the icon interface, the Wi-Fi icon turns on to show
that Wi-Fi is enabled.
Wi-Fi Icon on Icon Interface
If you are not using a DHCP network, follow the next procedure to
manually assign network settings (such as the printer IP address) to a
printer with the LCD interface.
Note: If you are using an icon printer and you do not know the printer
IP address, you need to use PrintSet 5 with a USB connection to a PC
to configure wireless network settings for a non-DHCP network.
Chapter 3 — Connect the Printer
01/04/2014
12:00
Wi-Fi icon
PD Series
85