System I/O Settings - Honeywell Intermec PD43 User Manual

System I/O Settings

PD43 and PD43c Commercial Printer User Manual
Virtual COM Settings (Continued)
Setting
New Line Character
RS-485 Printer
Address
This section describes system I/O settings for the printer. To view these
settings:
• From the printer Main Menu, select Settings > System Settings >
Manage I/O.
• From the printer web page, click the Configure tab, System
Settings > Manage I/O.
System I/O Settings
Setting Description
Wireless 802.11 Determines if the printer is allowed to
communicate using its 802.11 radio.
Supported only if the optional
Wi-Fi+Bluetooth module is installed.
Bluetooth Determines if the printer is allowed to
communicate using its Bluetooth radio.
Supported only if the optional
Wi-Fi+Bluetooth module is installed.
RFID Determines if the printer is allowed to
communicate using its RFID radio. Supported
only if the RFID module is installed.
Virtual COM Determines if you can enable the USB port to
be used as a virtual serial port. When you
change this setting, you must restart the
printer to enable the new setting.
Description
Defines the characters that the printer
echoes to the host to indicate that it has
moved to a new line.
Sets the RS-485 protocol address of the
printer. This address is used with
point-to-point or multidrop
communications.
Appendix B — Default Settings
Default
CR/LF
0
Default
Enable
Enable
Enable
Disable
165