Table of Contents
Advertisement
Appendix B — Default Settings
Error, Information, and Warning Alert Settings
154
This section describes error, information, and warning alerts and
settings.
To view these settings, from the printer web page, click the Configure
tab, Alerts > Error, Warning, or Information.
Note: These alert settings cannot be configured from the printer Main
Menu.
Alert settings apply to each of the error, information, or warning alerts
and are configured individually by alert.
Alert Setting Descriptions
Setting
Description
Status
Determines if an alert is sent out for a specific printer event.
Delay Repeat
Sets how often the alert is sent out for a specific printer
event. Range is 1 to 65535.
Delay Unit
Selects the unit of measure that determines how often the
alert is sent out.
Message
Sets the message that is sent out with each alert for a specific
printer event.
Error Alert Default Settings
Error Alert
Status
Out of Media Enable
Out of Ribbon Enable
Printer in
Disable
Pause Mode
Printer in
Disable
Menu Mode
Application
Disable
Break
RFID Not
Disable
Installed
Delay
Repeat
Delay Unit
1
Occurrences
1
Occurrences
1
Occurrences
1
Occurrences
1
Occurrences
1
Occurrences
PD43 and PD43c Commercial Printer User Manual
Message
Error - Out of media
Error - Out of ribbon
Printer in pause mode
Printer in menu mode
Error - Application
Break
Error -RFID not
installed
Advertisement
Table of Contents
