Print Quality Settings - Honeywell Intermec PD43 User Manual

Appendix B — Default Settings

Print Quality Settings

162
Media Settings (Continued)
Setting Description
Head Down Sets the action when you close the print
Action mechanism after opening it:
•
No Action
•
Formfeed - The printer feeds one label.
•
Testfeed - The printer prints a
configuration label.
This section describes print quality settings. To view these settings:
• From the printer Main Menu, select Settings > Printing > Print
Quality.
• From the printer web page, click the Configure tab, Printing >
Print Quality.
Print Quality Settings
Setting Description
Print Speed Sets how fast the printer prints labels. The unit
of measure is defined in the Unit of Measure
parameter.
Media Sets the level of sensitivity of the media to the
Sensitivity printhead heat for media and ribbon.
Darkness Sets the image darkness for media and ribbon.
Adjust this parameter with the Media Sensitivity
parameter. Range is 1 to 100.
Contrast Adjusts the blackness of the printing on the
label in 2% increments from -10% to +10%.
PD43 and PD43c Commercial Printer User Manual
Default
No Action
Default
100
Variable
Variable
+0%