Front Fork Adjusters - Ducati Streetfighter Owner's Manual

Front fork adjusters

1 2 1 2
The front fork used on this motorcycle has rebound,
compression and spring preload adjustment.
This adjustment is done using the outer adjusters:
1) for rebound adjustment (fig. 53);
2) for spring preload adjustment (fig. 53);
3) for compression adjustment (fig. 54).
Put the motorcycle on the side stand and make sure
it is stable.
Turn the adjuster (1) on every fork leg top with a
suitable wrench to adjust rebound damping.
As you turn the adjusting screws (1 and 3), you will
fig. 53
hear them click. Each click identifies a setting. The
stiffest damping setting is obtained with the adjuster
turned fully clockwise to the "0" position. Starting
from this position, turning counter clockwise, you can
count the clicks.
As you turn the adjusting screws (1 and 3), you will
hear them click. Each click identifies a setting. The
stiffest damping setting is obtained with the adjuster
turned fully clockwise to the "0" position. Now turn
the adjuster counter clockwise and listen for the
clicks that identify setting positions no. "1", "2" and
so on.
81