Activation Of The System - Ducati Streetfighter Owner's Manual

Activation of the system

To activate the system, the motorcycle must be
stationary and safely parked.
To enable Traction Control, enter the menu and set
"DTC" to "On" by pressing RESET button (14, fig. 5)
for 3 seconds; once the 3 seconds have elapsed, the
message "DTC" will appear on the display to indicate
activation of the Ducati Traction Control system.
When activated, the message "DTC" is visible both
on the normal display and also within the menu
pages.
Note
The functions of the system
To operate the system, the motorcycle must be
stationary and safely parked.
Each time DTC is activated, the Traction Control ECU
will set the sensitivity level to 8; the level may then
be adjusted using the function "Traction Control
Sensitivity Level Setting (DTC SETUP)".
To disable Traction Control, enter the menu and set
"DTC" to "OFF" by pressing RESET button (14, fig.
5) again for 3 seconds; once the 3 seconds have
elapsed, the message "DTC" will disappear from the
display, thereby indicating deactivation of the Ducati
Traction Control system.
If the engine suddenly stops or is switched off (Key-
Off) while Traction Control is activated, the function
46
will NOT be disabled but will still be active (DTC On)
at the next Key-ON.
If, however, battery power is suddenly cut off (Batt-
OFF), when battery power is restored and upon next
Key-On, the Traction Control will no longer be
activated (DTC OFF).
Routine maintenance
To ensure that system continues to function correctly
it is necessary to observe the manufacturer's
programmed maintenance schedule.