Chapter 1 Outline; Part Names; Front Panel - Mitsubishi Electric MELSEC iQ-F Series User Manual

1
OUTLINE
1.1

Part Names

Front panel

No. Name
[1] DIN rail mounting hooks
[2] Expansion adapter connecting
hooks
[3] Terminal block cover
[4] Peripheral device connecting
connector cover
[5] Expansion board connector cover
[6] Input display LED
[7] PWR LED
ERR LED
P.RUN LED
CARD LED
SD/RD LED
[8] Extension connector cover
[9] Output display LED
[2]
[3]
[4]
[3]
[2]
[1]
Description
Hook for mounting the CPU module on a DIN rail of DIN46277 (35 mm wide).
When connecting an expansion adapter, secure it with these hooks.
Cover for protecting the terminal block.
The cover can be opened for wiring. Keep the covers closed while equipment is running (power is on).
Cover for protecting the SD memory card slot, the RUN/STOP/RESET switch, and others.
The built-in USB communication connector, built-in Ethernet communication connector, RUN/STOP/RESET switch,
SD memory card slot, and others are located under this cover.
Cover for protecting the expansion board connector.
Lit when input is on.
Indicates whether the CPU module is powered or not.
Lit: Powered
Off: Not powered or hardware error (Page 132 Checking with LEDs)
Indicates the error status of the CPU module. (Page 132 Checking with LEDs)
Lit: Error or hardware error
Flashing: Factory default setting, error, hardware error, or resetting
Off: Operating normally
Indicates the program running status.
Lit: Operating normally
Flashing: Paused, Stopped (program mismatched), or online program change (PAUSE or RUN was set at the time
of online program change.) (Page 132 Checking with LEDs)
Off: Stopped or stop error
Indicates whether an SD memory card can be used or not.
Lit: Can be used or cannot be removed.
Flashing: In preparation
Off: Not inserted or can be removed.
Lit when the CPU module is sending or receiving data through built-in Ethernet communication.
Cover for protecting the extension connector.
Connect the extension cable of an extension module to the extension connector under the cover.
Lit when output is on.
[5]
[6]
[7]
[8]
[9]
1 OUTLINE
1.1 Part Names
1
23