Mitsubishi Electric MELSEC iQ-F Series User Manual page 156

■Transistor output (source output)
Item
No. of output points
Connection type
Output type
External power supply
Output circuit insulation
Indication of output operation
Max. load
Open circuit leakage current
Min. load
Response time OFF→ON
ON→OFF
Voltage drop when ON
Output circuit configuration
APPX
154
Appendix 3 I/O Module
Specifications
FX5-8EYT/ESS 8 points
FX5-16EYT/ESS 16 points
FX5-16ET/ESS 8 points
FX5-32ET/ESS 16 points
FX5-C16EYT/DSS 16 points
FX5-C32EYT/DSS(-TS) 32 points
FX5-C32ET/DSS(-TS) 16 points
FX5-EYT/ESS, Screw terminal block (M3 screws)
FX5-16ET/ESS,
FX5-32ET/ESS
FX5-CEYT/DSS, Connector
FX5-C32ET/DSS
FX5-C32EYT/DSS-TS, Spring clamp terminal block
FX5-C32ET/DSS-TS
Transistor/source output
5-30 V DC
Photo-coupler insulation
LED is lit when output is on
• With FX5-C32EYT/DSS, the lower number/higher number order is switched with the DISP switch
F/L.
• With FX5-C32ET/DSS, the input/output is switched with the DISP switch IN/OUT.
FX5-EYT/ESS, 0.5 A/point
FX5-16ET/ESS, The total load current of resistance loads per common terminal should be the following value.
FX5-32ET/ESS • 4 output points/common terminal: 0.8 A or less
• 8 output points/common terminal: 1.6 A or less
FX5-CEYT/DSS(-TS), 0.1 A/point
FX5-C32ET/DSS(-TS) The total load current of resistance loads per common terminal should be the following value.
• 8 output points/common terminal: 0.8 A or less
0.1 mA/30 V DC

FX5-EYT/ESS, 0.2 ms or less/200 mA (at 24 V DC)
FX5-16ET/ESS,
FX5-32ET/ESS
FX5-CEYT/DSS(-TS), 0.2 ms or less/100 mA (at 24 V DC)
FX5-C32ET/DSS(-TS)
FX5-EYT/ESS, 0.2 ms or less/200 mA (at 24 V DC)
FX5-16ET/ESS,
FX5-32ET/ESS
FX5-CEYT/DSS(-TS), 0.2 ms or less/100 mA (at 24 V DC)
FX5-C32ET/DSS(-TS)
1.5 V or less
FX5-EYT/ESS,
Load
FX5-16ET/ESS,
FX5-32ET/ESS
Fuse
Fuse
FX5-CEYT/DSS(-TS),
Load
FX5-C32ET/DSS(-TS)
DC power supply
Fuse
DC power supply
Fuse
Y
DC power
supply
+V0
Y
DC power
supply
+V1
Y
+V0
+V0
Y
+V1
+V1