Input Wiring; Dc Input (Sink And Source Input Type) - Mitsubishi Electric MELSEC iQ-F Series User Manual

6.5

Input Wiring

The input wiring of the CPU module, I/O modules, and terminal modules is explained below.
24 V DC input (Sink and source input type)
For input specifications of the CPU module, refer to Page 29 Input Specifications.
For input specifications of the I/O modules, refer to Page 150 Input specifications.
For input specifications of the terminal modules, refer to Page 169 Input specifications.
Sink and source input
■Differences between the sink input circuit and the source input circuit
• Sink input [-common]
Sink input means a DC input signal with current-flow from the input
(X) terminal.
When a device such as a transistor output type sensor is
connected, NPN open collector transistor output can be used.
■Switching between sink/source inputs
To switch the input type to sink or source input, wire the [S/S] terminal to the [0V] or [24V] terminal.
• Sink input: Connect the [24V] terminal and [S/S] terminal. (Page 95 Sink input)
• Source input: Connect the [0V] terminal and [S/S] terminal. (Page 96 Source input)
All inputs (X) of the CPU module can be set to either sink input or source input by selection.
6 WIRING
90
6.5 Input Wiring
L
N
24V
0 V
S/S
X
• Source input [+common]
Source input means a DC input signal with current-flow into the
input (X) terminal.
When a device such as a transistor output type sensor is
connected, PNP open collector transistor output can be used.
L
N
24V
0V
S/S
X