Care Of Your Arriva 752 - Rinnai Arriva 752 Operation Manual

Hide thumbs Also See for Arriva 752:
Table of Contents

Advertisement

Care of your Arriva 752

Your Arriva needs very little maintenance, however the following information will help to keep it
looking good and working efficiently
Important
Switch off the fire before cleaning. DO
NOT attempt to clean the unit while it is
IMPORTANT
hot or operating.
DO NOT use solvents. All parts of the fire and
remote can be cleaned using a soft damp cloth
and mild detergent.
About the filters
The filters are located inside the room air return
doors (side louvres) and consist of two metal
mesh strips. The buildup of dust on the filters
reduce air flow through to the fire. This reduces
the operating efficiency and can lead to the fire
shutting down. Regular filter cleaning during the
heating season will stop this from happening.
Cleaning the filters
Clean any dust or debris from both sides of the
filters using a vacuum cleaner, a soft dry cloth,
or a soft brush. NEVER attempt to clean the
filters with water.
Heater shut down due to filter blockages
Do not wait for the blockage indicator (error
code 14) to come on before cleaning the filters,
and do not continue to use the fire if the LED
indicator is flashing red.
Once the indicator light is flashing, if no action
is taken, the heater will eventually shut down
to avoid overheating. Error code 14 will be
displayed in the error display on the control
panel.
Restoring the fire after a shut down
To restore normal operation after a filter
blockage:
1. Press the On/Off button to turn off.
2. Clean the filters.
3. Press the On/Off button to turn on.
4. Use the remote control to resume normal
operation.
Bottom louvres
It is important that the warm air discharge
louvres are kept clear of any obstructions as
this will affect the performance of the fire.
When an obstruction is detected the blockage
indicator LED will go red and the fire will turn
down to low (front burner only). To restore
normal operation, remove the obstruction
and use the remote control to resume normal
operation.
Filters are located inside
the room air return doors
Arriva 752 operation guide: 12219-C 03-20 | 7

Advertisement

Table of Contents
loading

Table of Contents