Remote Access Via Web Client - KGuard Security HD Series User Manual

Default user name: admin, default password: 123456

Table of Contents

Use the Web Client to remotely access your DVR at anytime via a PC. Before you access the Web Client, you need to ensure that the network settings of the DVR are configured

properly. The most convenient and easiest way is if you have set the DVR a static IP address (please see

only need to open the web browser on your PC and type in the static IP address you have set on the DVR. However, if the IP address of the DVR is assigned by a DHCP server (see

"Main Menu > Parameter > Network > Network" on page

a static IP address. If not, then configure the DDNS service. See the network settings in

Network > DDNS & FTP" on page 24.

Also, please make sure the UPnP is configured in the DVR and router, or the manual port forwarding is completed in the router.

For Safari on Mac OS, verify the following:

NOTE:

a. Make sure you have installed or updated the Web plug-in to the latest version. Click the download link to download the SurveillanceClient Installer software, close the browser, and

follow the on-screen instructions to install the software on your Mac.

b. Make sure that the Web plug-in is enabled in your browser (go to Safari > Preferences > Security > check Allow Plug-ins checkbox).

c. When logging in for the first time, click Trust to enable your browser to use "SurveillanceClienth.plugin" plug-in.

Logging In

To access the Web Client, do the following:

Launch the web browser (Internet Explorer) on your PC and enter the DVR static IP address or DDNS domain name (Host Name) you have set on DVR in the URL box.

The following IP address is an example only.

NOTE:

The user login page opens as shown.

Enter the User Name and Password. Then click Login.