Assembly Of Horizontal Tail - H-KING J3 Navy Cub Instructions Manual

ASSEMBLY OF HORIZONTAL TAIL, VERTICAL TAIL & TAIL WHEEL:
1
Install the control horn to the
elevator using the 1.7X15mm
screws provided.
4
Install the horizontal tail onto the fuselage with screw the 2 off M3x30mm screws provided.
5
Install the vertical tail using the M3x45mm
6
Assemble the tailwheel parts using a medium CA glue.
8
Connect the rudder pushrod to the tailwheel control arm
shown.
2
Install the rudder plate into
the vertical tai l.
and the M3x40mm screw provided.
as
5
3
Install the control horn to
the rudder using the
1.7x15mm screws provided.
7
Install the tailwheel assembly using
the 2.6x8mm screws provided.
Set the elevator at neutral
and connect the pushrod.