Assembly Instruction - H-KING Vought f4U Corsair Instruction Manual

Assembly Instruction:

1. Assembly of the main landing gear
Install the landing gear into the slots which are located on the underside of the main wing.
Note: Both wheels face each other. Secure each one using 2 x 8mm self-tapping screws.
2. Assembly of the main wing
Connect the aileron servo connectors together. Then install the main wing onto the fuselage wing
saddle using the supplied 4 x 35mm machine screw to secure it in place.
3. Attaching the stabilizer to the fuselage
Apply some foam glue to the saddle mount as shown, assemble the stabilizer onto the mount and
apply some pressure to it whilst the glue dries. Ensure the stabilizer is aligned to the wing as the
glue sets.
4