Airframe Assembly - H-KING MINI SKY HUNTER Assembling Manual

Contents
*Photo shows PNP airframe. Plywood FPV tray and decal set not shown.
3

Airframe Assembly

1) Locate elevator servo extension and insert
through the left tail boom. The female servo
plug should be toward the tail.
*Note* For optional rudders, insert rudder servo leads at this time. See page 8 for rudder installation.
2) Connect elevator servo plug to servo
extension. Secure with tape or servo clip.
3) Attach horizontal stabilizer to tail booms
using 4 * M2x16mm screws and nuts. Secure
with blue thread lock.
4) Attach vertical fin using 4 * M2x16mm
screws and nuts. Secure with blue thread lock.