Assembly Of The Front Landing Gears - H-KING J3 Navy Cub Instructions Manual

ASSEMBLY OF THE MAIN LANDING GEAR:
1
Glue the steel wire to
the landing gear fairings
4
Attach the springs to the landing gear and use heatshrink to cover the springs.
5
Slide the wheel onto the steel wire and ensu re
the wheel rotates easily on the axle.
7
The landing gear assembly
is now complete.
2
Glue the front landing gear wire to the rear.
6
Screw the wheel chock through the wheel onto
the ste el axle in a c lockwise direction.
4
3
Glue the gears parts
together as shown.