Table of Contents
Advertisement
4-19.7
Check that tires are of proper size, load
rating, and inflated to manufacture specifica-
tions before transporting. Check wheel lug
bolts to insure tightness.
4-19.8
Know the transport heights and widths
of the unit before transporting. Attachments
such as leveling harrows can increase the
transport dimensions of the implement. Use
caution when transporting near bridges and
power lines.
WARNING
ELECTROCUTION CAN OCCUR WITH-
OUT DIRECT CONTACT.
4-19.9
Raise the unit to full transport height.
4-19.10
Install transport locks on both lift and
fold systems. Do not depend solely on imple-
ment hydraulics for transport. (See Figure
4-18).
WARNING
FAILURE TO USE TRANSPORT LOCK
PINS DURING TRANSPORT MAY RE-
SULT IN PERMANENT EQUIPMENT
DAMAGE, SERIOUS I NJURY, OR
DEATH.
4-19.11
Transport during daylight hours when-
ever possible. Always use flashing warning
lights, except where such use is prohibited
by law.
Make sure lights, reflectors and
SMV emblem are clearly visible and operat-
ing. Remove any obstructions such as dirt,
mud, stalks or residue that restricts view be-
fore transporting.
4-19.12
Be sure to disassemble rear jack as-
sembly and move into transport position (See
Figure 4-19) before moving machine.
1-3/8 x 10 TRANSPORT
LOCKOUT
L PIN
1/8 HAIR PIN
6230translock2
Figure 4-18 Installed Transport Locks
REAR JACK
ASSEMBLY
REAR
FRAME
rear jack transport position
Figure 4-19 Rear Jack Transport Position
4-19
Advertisement
Table of Contents
