Table of Contents
Advertisement
4-5.5
To fold/unfold the VT Plus, find a level
area large enough to accommodate the VT
Plus when it is fully unfolded. The tractor
should be stopped and not moving with the
unit fully raised. Remove the wing lock pins
from the mounts and install them in the stor-
age locations (See Figures 4-5 and 4-6).
IMPORTANT
FAILURE TO REMOVE THE LOCK PINS WHEN
UNFOLDING WILL RESULT IN SERIOUS DAM-
AGE TO THE IMPLEMENT. BE SURE OTHER
PEOPLE AND PETS ARE A SAFE DISTANCE
AWAY.
4-5.6
Slowly engage the tractor lever and
fold/unfold the wing frames. When the wings
are unfolded, continue holding the tractor le-
ver to fully extend all fold cylinders. This will
allow the wings to fully flex in the field.
4-5.7
When the unit is fully folded, remove the
wing lock pins from the storage location and
install in the mounts provided on each side
of the machine.
4-6
3/16 HAIR PIN
WING STABILIZER
BRACKET
1/4 X 3 ROLL PIN
WING LOCK PIN
6230foldlock1
Figure 4-5 Installed Position of Transport Locks
3/16 HAIR PIN
WING STABILIZER
BRACKET
1/4 X 3 ROLL PIN
WING LOCK PIN
6230foldlock2
Figure 4-6 Stored Position of Transport Locks
Advertisement
Table of Contents
