Remote Control Setup And Operation; 10-Button Remote - ORTAL 40 Series Installation And Operation Manual

→
WARNING – Read these instructions carefully before lighting the fireplace.
Remote Control Options
1. 10-Button Handset (new)
2. Puck Handset (new)
3. Wall Switch
4. myfire App (new)
IMPORTANT NOTES:
• Wiring of valve and receiver must be completed before starting ignition. Failure to do so could damage the
electronics.
• If operating the fireplace without an AC adapter, battery replacement is recommended at the beginning of
each heating season.
• Fireplaces with double glass, power vented, and/or lights features must operate using the AC Adapter and
therefore will not operate during a power failure.
• Only the Mertik Maxitrol AC Adapter (or one pre-approved by Mertik Maxitrol) is permitted for use with the
fireplace. Use of other adapter brands can render the system inoperable. The handsets, receivers, wall
switches are not interchangeable with other electronics.
• Batteries must be kept within their recommended temperature limits (32F to 131F).

10-Button Remote

Control Option Radio Frequency
10-Button Handset
IMPORTANT: For safety/communication purposes, 10-button handset must be located within 26 feet of the
receiver.
NOTE: Any device that functions using the same radio frequency as the handset will be affected when
handset is in use.
72

Remote Control Setup and Operation

• 918.0 MHz
• 2 x 1.5V AAA batteries
•
(quality alkaline recommended)
(U.S. & Canada)
Power Supply
• Replace batteries after 2
years or when low
battery indicator
appears on handset
display