Operation; 10-Button Remote Control Handset - ORTAL 98 Series Installation And Operation Manual

WARNING – Read these instructions carefully before lighting the fireplace.
Four operation options are available for use with the fireplace:
10-Button Remote Control Handset (default option, always included with the fireplace)

Puck Handset (optional accessory)

Wall Switch (optional accessory)

MyFire Application (optional accessory)

IMPORTANT: The 10-Button remote control handset is always included with the fireplace regardless of
which operation option is chosen.
fireplace at all times.
NOTES:
Wiring of valve and receiver must be completed before starting ignition. Failure to do so could damage the electronics.

If operating the fireplace without an AC adapter, battery replacement is recommended at the beginning of each heating

season.
Fireplaces with double glass, power vent, and/or interior lighting features must operate using the AC Adapter and therefore

will not operate during a power failure.
Only the Mertik Maxitrol AC Adapter is permitted for use with the fireplace. Use of other adapter brands can render the

system inoperable. The handsets, receivers, wall switches are not interchangeable with other electronics.
Batteries must be kept within their recommended temperature limits (32°F to 131°F).


10-Button Remote Control Handset

Control
Option Frequency
10-Button 918.0 MHz
Handset (U.S. & Canada)
IMPORTANT: For safety/communication purposes, 10-button handset must be located within 26 feet of the receiver.
NOTE: Any device that functions using the same radio frequency as the handset will be affected when handset is in
use.
DO NOT DISCARD.
Radio
2 x 1.5V AAA batteries
(Quality alkaline
recommended)

Operation

The 10-Button remote must be kept within 26 feet of the
Power Supply
Replace batteries after 2 years or when low battery
indicator appears on handset display
47