Certifications And Codes - ORTAL 40 Series Installation And Operation Manual

All Ortal fireplaces have been tested and approved by CSA for safety and efficiency for use with either Natural Gas
(NG) or Propane (LP), and NOT for use with solid fuels.
NOTE: Some fireplaces are not certified to be used with Propane gas. "See Product List" below for details.
Certification Code (U.S. & Canada):
ANSI Z21.88/CSA 2.33 - Vented Gas Fireplace Heaters
ANSI Z21.50/CSA 2.22 - Decorative Vented Gas Fireplaces
Products:
CLASS 2901 84 – DOMESTIC HEATERS (GAS) Vented Fireplace – Certified to US Standard
CLASS 2901 04 – DOMESTIC HEATERS (GAS) Vented Fireplace
CSA Group is approved by the American National Standards Institute (ANSI) as an Accredited Standards Developer.
All Ortal fireplaces, except Tunnel models, are permitted for indoor use only. Tunnel models can be specialized for
indoor-outdoor use with an "Indoor-Outdoor Kit" supplied by Ortal. For indoor installation, fireplaces must be
installed while maintaining required clearances. Ortal fireplaces are not approved for fully outdoor installation.
Installation is recommended in living spaces such as bedrooms, living rooms, great rooms, etc. The fireplaces are not
approved for closet installation.
The fireplace must be installed according to Ortal requirements in addition to any local codes that may apply, such
as:
•
USA: ANSI Z223.1/NFPA 54
•
Canada: CSA B149
In addition:
•
Consult the authority having jurisdiction to determine the need for a permit PRIOR to starting the
installation.
•
It is the responsibility of the installer to ensure that this fireplace is installed in compliance with the
manufacturer's instructions and all the applicable codes.
•
Before starting, take careful note of ALL the WARNINGS in this manual.
Patent Pending for screen barrier glass bracket: USSN 60/040,074
4

Certifications and Codes