Maxxus 4.2 Installation & Operating Manual page 9

Assembly
Step 6: Assembling the Cockpit
Loosen and remove the four pan head screws (11) preassembled on the back of the cockpit (J). Connect the
cables protruding from the cockpit (J) with the cables protruding from the handlebars. Carefully check the cable
connections. Carefully push the excess cables back into the handlebar shaft (D). Now secure the cockpit (J) to
the handlebar shaft with the four pan head screws (11).
CAUTION:
When attaching the cockpit (J) make sure that you do not crush or damage the cables.
J
11
ENG
D
Step 7: Assembling the Bottle Holder
Loosen and remove the two M5 Allen screws (12) on the handlebar shaft (D) and use them to attach the bottle
holder (G) to the handlebar shaft (D).
D
G
12
9