Maxxus 4.2 Installation & Operating Manual page 17

Hide thumbs Also See for 4.2:

Table of Contents

Training Profiles P1 – P12

In this type of training, the user can choose from twelve pre-programmed training profiles. The profile is not

changeable; however, the user has the option of adjusting the intensity of the respective profile according to

their current state of fitness.

Step 1: Program Selection

Turn on the exerciser. The upper part of the display flashes "M". Select the desired training profile by turning the

control knob clockwise / anti-clockwise.

Step 2: Setting the Training Level

Select the desired training level by turning the control knob clockwise / anti-clockwise. Confirm your selection by

pressing the control knob.

Step 3: Setting the Training Time

The value in the "TIME" window flashes. Enter the training time by turning the control knob clockwise / anticlock-

wise. You can set the exercise time from 1:00 to 99:00 minutes in 1-minute increments.

Step 4: Training Start

Press the START / STOP key to start exercising.

Training End

When the desired training time has been reached, training will end automatically.

Setting the Training Level

During training, you can change the currently selected training level within the given frame by turning control

knob clockwise / anti-clockwise at any time.

P10

Cockpit

P11

P12

ENG

Table of Contents