Maxxus 4.2 Installation & Operating Manual page 7

Assembly
Step 2: Assembling the Front Stand
Attach the front stand with transport rollers (B) with two 3/8" hexagon head screws (2), four 3/8" washers (1) and
two 3/8 "cap nuts (8) to the front mounting of the base frame (A).
8
B
A
1
2
ENG
D
3
Step 3: Assembling the Handlebar Shaft
Connect the end of the cable coming out of the bottom of the handlebar shaft
(D) to the end of the cable protruding from the base frame (A). Now place
the handlebar shaft (D) on the mounts on base frame (A) and fix it with four
hexagon nuts M8 (3).
CAUTION:
When inserting and securing the handlebar shaft, make sure that you do not
crush or damage the cables.
A
7