Step 4: Assembling The Handlebars - Maxxus 4.2 Installation & Operating Manual

Assembly

Step 4: Assembling the Handlebars

Pass the hand pulse measurement cable, coming out from the bottom of the handlebar (E), in through the
upper, front opening of the handlebar shaft (D) and then out from the upper opening. Now lead the two cables
(hand pulse measurement & connection cable) upwards from below through the opening in the handlebar (5).
Note:
Pull out the cables only as far as necessary to connect them to the cockpit later.
Now fix the handlebar (E) with two Allen bolts M8 (4) to the handlebar shaft (D).
CAUTION:
When attaching the handlebar (E), be careful not to crush or damage the cables.
4
E
D
Step 5: Assembling the Handlebar Shaft Cover
Place the two parts of the handlebar shaft cover (H) on the right and left of the joint between the handlebar shaft
(D) and the base frame (A). Secure it with two self-tapping screws (9).
H
D
A
9
8