Key Switch; Key Switch - Kioti RX6010C Manual

4
 rx6010c / rx6010pc
-

KEY SwITCh

(1) Key switch

(a) pre-heat
(c) acc (d) on
(a)

the position "a" indicates the
"manual preheat". this position
is a self-return type, so the key
should be held there while pre-
heating. the pre-heating indication
lamp on the dash board will turn
on at the same time. Pre-heating
more than 30 seconds consecu-
tively can reduce the preheat
system's life.
M55-유럽판-04.indd 6
(b)

when the key switch is in position
"b", the engine and all electrical
devices in the vehicle are turned
off.
however flasher lights and turn
signal lights can be operated along
with their indication lamps on the
dash board.
M55O4K6A
acc (c)

(b) stop
when the key switch is turned
(e) start
to the position "c", brake lights,
flasher lights and turn signal lights
can be operated.
(d)

the position "d" indicates the "on"
position. as soon as the key switch
is turned to this position, the oil
pressure warning lamp and battery
charge warning lamp comes on
(these turn off after the engine is
started).
NOTE
The pre-heating operation will

automatically be activated in
this position "D" (ON). The
automatic preheat operation
is indicated by the glow plug
indicator. Make sure to preheat
the engine until the glow plug
indicator goes off (approx. 8
seconds) in cold weather.
(e)

the position "e" indicates "start".
in order to start the engine, de-
press the clutch pedal and turn
the pto switch off.
as soon as the engine is started,
release the key then the key will
return to the position "d".
2011-08-11 오전 11:58:00