Figure 1-5. Head Adjustment Lever Positioning; Table 1-6. Lever Adjustment; Table 1-7. Ribbon Cartridge Specification - Epson LQ-860 Technical Manual

NOTES : 1. Printing of Iabes is only available at normal temperature.
2. Labels must be fanfold.
3. Labels with pressure-sensitive paper must be jointed by pasting along the dots or lines, and
the total thickness must be less than or equal to 0.3 mm (0.0118") to be printed out under
conditions that must be between 5 to 35-C and 10 to
4. Examples of Iavels:
Lever Adjustment

Table 1-6. Lever Adjustment

Lever Position
2nd
3nd
4th
5th
NOTES : 1.
When printing density becomes lighter, set the head adjustment lever one position lower.
2. When using thicker paper than shown in the above table, set the head adjustment lever to
the 6th or higher appropriate position by performing the self-test operation.
Ribbon Cartridge
Ribbon Model No.
AVERY CONTINUOUS FORM LABELS
AVERY MINI-LINE LABELS
See Figure 1-5 and l-able 1-6.
Paper Thickness
0.13-0.17
0.1 8-0.:!5
0.26-0.32
See Table 1-7.

Table 1-7. Ribbon Cartridge Specification

#7762
[mm]
I

Figure 1-5. Head Adjustment Lever Positioning

#7764
1-7
RH.
80°/0
#7763
REV.-A