Setting The Thickness Adjustment Lever - Epson Stylus Color II Reference Manual

Setting the Thickness Adjustment Lever

Use the table below to set the thickness adjustment lever for
your media type.
Paper type
Standard paper
Transparency film
Envelopes or labels
Previously smeared documents
If a document is smeared, set the thickness adjustment lever to
the + position (regardless of the paper type) and print it again.
To access the lever, open the printer cover; the lever is in the
left back corner, as shown in the following illustration.
1-4
Paper Handling
Thickness adjustment lever position
0
0
+
+
thick paper
setting
plain paper
setting