Figure 1-5. Head Adjustment Lever Positioning - Epson LQ 1050 - B/W Dot-matrix Printer Technical Manual

Printing of labels is only available at
NOTES: 1.
2. Labels must be fanfold.
3. Labels with pressure-sensitive paper
and the total thickness must be less
under conditions that must be between 5 to 35 "C and 20 to 80Y0 RH.
Examples of labels: AVERY CONTINUOUS FORM LABELS
4.
Lever Adjustment
Table 1-9. Lever Adjustment
Lever Position
2nd
3rd
4th
5th
NOTES: 1. When printing density becomes lighter, set the head adjustment lever one position lower.
2. When using thicker paper than shown in the above table, set the head adjustment lever
to the 6th or higher appropriate position by performing the self-test operation.
Ribbon Cartridge
Ribbon Model No.
Printer
Color
Life
Dimension
X (h) X (d)
(W)
AVERY MINI-LINE LABELS
See Figure 1-5 and Table 1-9.
Paper Thickness [mm]
0.06 - 0 . 1 2
o.13 - 0 . 1 7
0.18
0.26 .
See Table 1-10.
Table 1-10. Ribbon
[characters]
[mm]
293 X 34 X 72
normal temperature.
must be jointed by pasting along the dots or lines,
than or equal to 0.3 mm (O. 11 8") to be printed out
Head adjustment Lever
Figure 1-5.
Cartridge Specification
# 8 7 5 0
Black
3 million (14 dots/character)
468 X 34 X 78
1-8
o
Head Adjustment Lever
Positioning
#8755 (M)
FX-1 050