Paper Feed Roller Assembly Removal - Epson Stylus Pro Service Manual

Disassembly and Assembly

3.2.5.9 Paper Feed Roller Assembly Removal

1. Remove the printer mechanism. (See Section 3.2.4.)
2. Remove the carriage unit. (See Section 3.2.5.2.)
3. Remove the tension spring holding the tension roller assembly to the sub frame.
4. Remove the torsion spring on the side frame (L) holding the tension roller assembly to the left side
frame.
5. Remove 1 CBS (M3 6) screw securing the tension roller assembly to the sub frame and remove the
tension roller assembly.
Tosion S pring
Figure 3-20. Tension Roller Assembly Removal
6. Release the 2 bushings securing the paper feed roller assembly to both the left side frame and the sub
frame. Then remove the paper feed roller assembly.
Figure 3-21. Paper Feed Roller Assembly Removal
3-16
Tension Roller Assembly
Paper Feed Roller A ssembly
Stylus Pro Service Manual
CBS (M3 x6)
Tension Spring
Rev.A