Paper Feed Roller Removal - Epson STYLUS COLOR 580 Service Manual

EPSON Stylus COLOR 580

4.2.11 Paper feed roller removal

1. Remove the Housing from the printer. (Section 4.2.1 Housing removal)
2. Remove the Paper Eject roller. (Section 4.2.10 Paper Eject Roller removal)
3. Release the PF grounding spring from the Main frame.
PF grounding spring
Figure 4-42. Releasing the PF grounding spring
4. Set the CR unit to the home position.
5. Release one hook located on the left edge of the Front paper guide.
Figure 4-43. Release two hooks of the Front paper guide
Disassembly and Assembly
hook
Front paper guide
6. Lift up the left edge of the Front paper guide while slanting the Front paper guide
by pulling up its front edge, and then slide the Front paper guide to the left side
after releasing the right hook on the Front paper guide.
Step1
Figure 4-44. Remove the Front paper guide.
7. Fit the protrusions of the Left PF roller bushing to the notches in the frames as
shown in the following figure and remove the PF roller fasten spacer with tweezer.
Left PF roller bushing
PF roller fasten spacer
Fit the protrusions of the Left PF roller bushing to each notches
8. Slide the Left PF roller bushing to right side as above figure Step 2.
Disassembly
Revision A
Step1
Paper guide front
Step2
1
2
Figure 4-45.
91