Table of Contents
Advertisement
5-22 DK65/75/80/90
LEVELING ADJUSTMENT (MANUAL)
(1) Lift Linkage
1. Adjust the position (leveling) of the
implement by turning the lift linkage lo-
cated on the right side.
2. After the adjustment, secure with the
lock nut.
3. Positioning is dependent upon the type
of implement.
LEVELING ADJUSTMENT (LIFT CYLIN-
DER EQUIPPED) (DK75,80,90)
628O539A
(A) Up
1. Level or tilt the implement from the
operator's station. Setting depends on
the type of implement.
2. Activate the rocker switch to make the
leveling adjustment.
REMOTE HYDRAULIC CONTROL LEVER
628O540A
(B) Down
(1) Remote Hydraulic Control Lever
The lift can be controlled from the ground
while attaching or detaching implements.
When leaving the driver's seat to
attach or detach implements:
Shift
neutral.
Set the parking brake.
Slow the engine to idle speed.
Push the draft control lever for-
ward to the floating range.
Keep bystanders clear of the trac-
tor and the implement.
628O541A
WARNING
the
transmission
into
Hide quick links:
Advertisement
Table of Contents
