Table Of Standard Bulbs; Slow-Blow Fuse Change; Changing Light Bulbs/Lamps - Daedong DK-Series Manual

6-18 DK65/75/80/90

SLOW-BLOW FUSE CHANGE

(1) Slow-blow Fuse
The slow-blow fuse is designed to pro-
tect the electrical system by disconnect-
ing the power source in the event of an
abnormal current draw. If it is blown, the
system should be inspected to correct
the cause.
Uncouple the fuse holder and remove the
blown fuse. Replace it with the genuine
replacement part.
WARNING
Replacing the slow-blow fuse with
anything other than the genuine
DAEDONG replacement part may
cause a fire, electrical system
damage, and personal injury.

CHANGING LIGHT BULBS/LAMPS

When a lamp does not work:
1. Check the appropriate fuse.
2. If the fuse is functional, remove the
bulb from its socket and check.
3. If the bulb has an open circuit, replace
it with a bulb of the same type, volt-
age and wattage.
628O628A

TABLE OF STANDARD BULBS

Bulb name Standard
Reserve lamp
Reserve lamp
Head light 12V 35W/35W
Direction indicator (front) 12V 15W
Direction indicator (rear) 12V 23W
Work light 12V 35W
Taillight (front)
Stoplight/Taillight (rear) 12V 21W/8W
Lighting on instrument,
12V 3.4W
fuel warning lamp
Bulbs except the above
14V 3.4W
bulbs on the instrument
Cab interior lamp 12V 10W
WARNING
Always use the correct type, volt-
age and wattage when replacing
bulbs. The wrong bulb will likely
result in malfunction.