Electrical System; Diagnosing Battery Condition; Changing Fuses And Lamps; Fuse Change - Daedong DK-Series Manual

ELECTRICAL SYSTEM

DIAGNOSING BATTERY CONDITION

The condition of the battery can be eas-
ily checked by inspecting the charge in-
dicator on the battery. If the charge indi-
cator is green, it indicates that the bat-
tery is fully charged. If it is black, the
battery needs to be charged. If it is white,
the battery should be replaced.
CAUTION
Add pure water to the battery up
to the prescribed level,
needed. Do not open or add wa-
ter if your battery is labeled as a
"maintenance-free" battery.
When using a battery charger, do
not exceed 10 amps. Excessive
quick-charging will decrease bat-
tery life.
Do not short-circuit the battery
terminals. It may cause battery
damage and personal injury.
When disconnecting the battery,
remove the negative (-) terminal
first. Attach the positive terminal
(+) first when reconnecting the
battery.
Recharge the battery every 2
months when the tractor is not
in use.
Always disconnect the negative
terminal (-) before welding any-
where on the tractor or attached
implement.

CHANGING FUSES AND LAMPS

FUSE CHANGE

as
(1) Fuse Box
1. Remove the cover of the fuse box.
2. Remove the blown fuse.
3. Install a new fuse of the same type
and capacity.
4. Fuse identifications and fuse amper-
age ratings are listed inside of the
fuse panel cover.
628O627A
CAUTION
Always use the correct fuse ca-
pacity and never insert any other
object in place of a fuse. Serious
damage or fire could result.
If a fuse blows repeatedly, a se-
rious electrical problem likely
exists. Consult your DAEDONG
dealer for assistance.
MAINTENANCE 6-17
628O631A