Seat; Drawbar Hitch; Seat Sliding Adjustment; Seatback Reclining Adjustment - Daedong DK-Series Manual

4-20 DK65/75/80/90

SEAT

(1) Seat (3) Seat Adjusting Lever
(2) Seat Reclining Lever

SEAT SLIDING ADJUSTMENT

Pull the lever located under the front of
the seat and slide the seat to the desire
position. After adjustment, gently rock in
the seat to make sure it is securely
locked.

SEATBACK RECLINING ADJUSTMENT

To adjust the seatback reclining angle,
lean forward and pull the lever upwards.
Adjust the seatback angle then release
the lever.
After adjustment, ensure that the
seatback is locked firmly in position.
SEAT BELT ADJUSTMENT
1. Ensure that seat belt is not twisted.
Insert the latch plate into the buckle
until it clicks.
2. Position the lap belt portion as low as
possible across your hips, not across
your abdomen. Pull the loose end of
the belt until the seat belt is snug, but
comfortable.
3. Press the button on the buckle to re-
lease the seat belt.
628O435A

DRAWBAR HITCH

(1) Drawbar Hitch
The drawbar should be used only for
implements suitable for this tractor.
WARNING
When towing, always connect the
load to the drawbar hitch. Tow-
ing or pulling from any other
point on the tractor may cause the
tractor to overturn.
628O436A