Table of Contents
Advertisement
Command and Response Table
Command
ASCII (Telnet)
(Host to Unit)
Bidirectional Serial Data Port
Send data string
E X!
X1&
*
NOTES:
X1&
X2)
X2!
X1&
•
*
*
*
is optional.
zero or b) be nonzero.
X@
•
For web encoding for
, convert non-alphanumeric characters to hex numbers. A space (hex = 20) is encoded as %20. A plus sign (hex = 2B) is encoded as %2B.
E
}
05*4*7*3L RS
Example:
X@
•
The data string (
) in this RS command is limited to 200 bytes.
X!
KEY:
= Specific port number (01 – 99)
X@
= Command data section
X1&
= Time in tens of milliseconds to wait for characters coming into a serial port before terminating (default = 1 = 10 ms, max. = 32767)
X2)
= Time in tens of milliseconds to wait between characters coming into a serial port before terminating (default = 2 = 20 ms, max. = 32767)
X2!
= Parameter to set either Length of message to receive or Delimiter value. If length delimited, use
xxD, where xx is the decimal ASCII value of the delimiting character.
URL Encoded (Web)
Host to Unit)
X2)
X2!
}X@
*
*
RS
X!
X1&
W
%2A
%2A
|X@
RS
X2)
is optional only if
is also missing. If these three variables are not specified, the default values are used. For this command,
<data>
W05%2A4%2A7%2A3L RS|<data>
1 = rear host (Host Control RS-232 port)
2 = front panel Config port
3 = slaved switcher (MLS port)
X@
is the command string for sending data to an AV product (for example, a switcher or projector) attached to an IPL T S unit (see
page 43 for remote processing examples and see
Response
(Unit to Host)
X2)
X2!
%2A
response from command
response from command
4 = display port (Projector RS-232/IR)
5 = IR/Serial port A
6 = IR/Serial port B
URL Encoding
on page 47 for command restrictions
xx
xx
L, where
is the length of the incoming message in bytes. If character delimited, use
IPL T S Series • Communication and Control
Additional Description
]
X1&
= The response includes leading zeros.
X2!
= The ASCII decimal delimiter # value can be
from 0 to 00255, default = the byte count.
Examples: A 3-byte length = 3L. A delimiter of ASCII
0A = 10D.
X1&
X2)
and
]
7 = IR/Serial port C
Customization
must both a) equal
on
30
Advertisement
Table of Contents
