Table of Contents
Advertisement
Configuration Using Global Configurator
Global Configurator (GC) is a simple-to-use, yet comprehensive software application that allows
non-programmers to configure a wide range of Extron IP Link-enabled products. GC provides
an integrated environment for defining AV control and monitoring system functionality from an
easy-to-use graphical user interface. It simple enough to be used for configuring a single room
controller, yet powerful enough to facilitate building a web-based asset management and remote
monitoring system for hundreds of AV devices in multiple locations.
Serial ports on the IPL T S Series devices can be configured using GC.
Global Configurator is available for free from www.extron.com.
To download Global Configurator:
1.
2.
3.
4.
5.
6.
7.
8.
Once installed on your local PC, Global Configurator can be used to configure your IPL T S
Series device and the AV devices that are attached to the S Series serial control ports.
See the Global Configurator help file for instructions on how to:
•
•
•
•
Open and Internet browser and advance to www.extron.com.
Click the Download tab.
Click the Global Configurator icon.
Click the Download Now button.
Complete the Personal Information form.
Scroll down the page and review any related Technical Bulletins.
Click the Download GCSW3XX.exe button.
Follow the remaining system prompts.
Figure 23.
Global Configurator
Download device drivers
Start Global Configurator
Create a GC project file
Add and configure IPL T S Series and AV devices
IPL T S Series • Introduction
20
Advertisement
Table of Contents
