Extron electronics IPL T S Series User Manual page 42

Command ASCII (Telnet)
(Host to Unit)
E-mail (continued)
Send e-mail (using
E X4% X7)
,
different file)
24
X4&.
NOTE: If file eml is not found when the SM command is executed, the MLC sends a default e-mail message.
KEY:
X4%
= E-mail event number: range = 1–48 (max.)
X4&
= Name of e-mail file to be sent (
NOTE: E-mail files must have a file extension of
X7)
= Number (as optional parameter) inserted into an e-mail message if the .eml file has an embedded ESC CR command with no parameters.
Set e-mail server IP E X1$ X1%
,
address and user
domain name 24
Mail Server Setup
Set mail server IP, unit
E X1& X1%
,
domain name
24
View mail server IP, unit
E }
CM
domain name
KEY:
X1$
P address (xxx.xxx.xxx.xxx). Leading zeros are optional in setting values. Leading zeros are suppressed in returned values.
= I
X1%
E-mail domain name, e.g.,
=
X7#
An e-mail account username (for SMTP authentication) of up to 31 characters. Do not use commas. This parameter is optional during setup.
=
X7$
An e-mail account password (for SMTP authentication) of up to 31 characters. Do not use commas. This parameter is optional during setup. In a response, instead of the
=
X7$
actual password, is displayed as 4 asterisks (****) if a password has been set up or as nothing (
NOTE: The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of an absolute system reset, the passwords convert to the default,
which is no password.
URL Encoded (Web)
Host to Unit)
X4% X7)
X4& } W %2C %2C
, SM
1.eml, 2.eml, ... 64.eml) (first line of the file = the subject, the rest = the body of the e-mail).
.eml.
The first line of the file is the subject, the rest is the body of the e-mail.
X7# X7$ }
, , CM
X1$ X1%
W %2C %2C
|
%2C CM
] X1$ X1% |
W %2C CM
CM
|
WCM
extron.com
Response
(Unit to Host)
X4& | X4% ]
SM Eml
• X1$ X1% X7#
Ipm , , ,
X7# X7$
%2C
X1$ X1%]
Ipm• ,
X1$ X1%]
,
) if it has not.
IPL T S Series • Communication and Control
Additional Description
X7)
= The number to insert into an e-mail message
.eml
if a ____ file has an embedded server-side
include <!--#echo var = WCR| --> (the
command with no parameters.) The numeral is a
16-bit number to be employed as the user defines.
This is an optional parameter. Use 0 as a
placeholder if the optional
X7)
is not needed.
X4&
=
xxx, where xxx = a number 1 to 999 corresponding
to the e-mail filename (xxx.eml). If xxx = 0 or no parameter is
given, the IPL T S unit sends the file that was set via the CR
command.
X7$
E}
X4&
variable is used but
35