Instructions For Use - Otto Bock 2C66 Instructions For Use Manual

► In case of changes in or loss of functionality, do not continue using the
product (see "Signs of changes in or loss of functionality during use" in
this section).
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern and by the development of noises.
4 Scope of delivery
Fig. Item
– –
– –
5 Preparation for use
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
NOTICE
Grinding the footshell
Premature wear resulting from damage to the footshell
► Do not grind the footshell.
► Inform the patient.
5.1 Applying/removing the footshell
Inserting the foot into the footshell
Recommended tools: 2C100 or 2C101 changing device for footshell
>
1) Slide the prosthetic foot into the footshell (see fig. 1).
2) Press the heel of the prosthetic foot into the footshell until it engages.
3) Pull the textile material of the footshell up to the groove in the ankle cover
and insert it in the groove (see fig. 2, see fig. 3).
2C66=*
Qua­ Designation
ntity

1 ( ) Instructions for use

1 ( ) Footshell
Reference num­
ber
647G1096
–
Ottobock | 11