Otto Bock 2C66 Instructions For Use Manual page 9

2 Application
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)
Other environmental conditions
UV light
Hydrolysis
2.3 Service Life
The product is a wear part, which means it is subject to normal wear and
tear.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Unallowable combination of prosthetic components
Risk of injury due to breakage or deformation of the product
► Only combine the product with prosthetic components that are
approved according to the section "Combination possibilities".
► Based on the instructions for use of the prosthetic components, verify
that they may be combined with each other.
CAUTION
Reuse on other patients
Not resistant
Not resistant
Ottobock | 9