Otto Bock 2C66 Instructions For Use Manual page 12

Removing the footshell
Recommended tools: 2C100 or 2C101 changing device for footshell
>
1) Loosen the textile material of the footshell from the groove in the ankle
cover.
2) Push the lock of the footshell to the rear and pull up the heel of the pros­
thetic foot.
3) Remove the prosthetic foot from the footshell.
6 Use
6.1 Information for use
CAUTION
Use of the product without shoes
Falling due to slipping on slippery surfaces
► Do not use the product on slippery surfaces.
6.2 Cleaning
CAUTION
Use of unsuitable cleaning agents or disinfectants
Impairment of functionality and damage due to incorrect cleaning agents or
disinfectants
► Only clean the product with the approved cleaning agents.
► Only disinfect the product with the approved disinfectants.
► Observe the instructions for cleaning and care.
NOTICE
Non-observance of cleaning instructions
Damage to product and permanent soiling due to use of improper cleaning
agents
► Only clean the product according to the cleaning instructions provided
in the instructions for use.
► Inform the patient.
Recommended cleaning agent: pH neutral soap (e.g. 453H10 Derma
>
Clean)
1) Clean the product with clear fresh water and a pH neutral soap.
2) Rinse the soap away with clear fresh water.
3) Dry the product with a soft cloth.
4) Allow to air dry in order to remove residual moisture.
12 | Ottobock