Control From The Front Panel; Displaying Setting Values On The Monitor; Selecting The User Setup - Olympus OEP-4 Instructions Manual

Table 4.1
Connected Description in instructions
Instrument
EU-M60 Section 6.13, "Operation of ancillary
equipment (printer, VTR, etc.)"
"Image recording using the color video
printer"
EU-C60 Section 6.8, "Recording"
"Image recording using the video printer"
4.2 Control From the
Front Panel
NOTE
To check the setup values on the monitor, connect the
video output signal from this instrument to the monitor
in advance.
Displaying Setting Values on the
Monitor
The setting value of this instrument can be displayed on
the monitor.
1
Press the DISPLAY button.
Each press of the DISPLAY button displays and
hides the setting value (print quantity, memory
page, operation mode, source/memory) of this
instrument alternately (see Figure 4.1).
DISPLAY button
Figure 4.1
NOTE
The setup display can also be controlled in the menu.
The setup made using the above procedure is also
applied to the setup using the menu. For details on
menus, see "Setting "DISPLAY"" on page 51.

Selecting the User Setup

Select the user setup registered in "SAVE USER" in
SYSTEM SETUP menu.

4.2 Control From the Front Panel

4
29