Chapter 2 Installation And Connection; Before Installation And Connection - Olympus OEP-4 Instructions Manual

Chapter 2 Installation and Connection

2.1 Before Installation
and Connection
This document, "INSTRUCTIONS (ADVANCED),"
explains equipment except described in
"INSTRUCTIONS (BASIC)."
Prepare this instrument and compatible equipment,
referring to the instruction manuals of each system
2
component. Install and connect the equipment as
follows:
WARNING
Review "INSTRUCTIONS (BASIC)" and fully
understanding the contents before each use. If the
equipment is not properly prepared before each use,
equipment damage, patient and operator injury and/or
fire can occur.
About connection of a power supply, refer to "2.4
Connection to the AC Mains Power Supply" in
"INSTRUCTIONS (BASIC)."
CAUTION
When you connect another piece of video equipment
between this instrument and a video system center,
video system, camera control unit or endoscopic
ultrasound center, be sure not to turn off the power of the
video equipment, etc., while this instrument is being
used. If you turn off the power of the video equipment,
etc., the video signal may not be input to this instrument
properly, and it may not work correctly.
15

2.1 Before Installation and Connection