Af Laser Axis Check - Sony DCR-IP210 Adjustment

20. AF Laser Axis Check

Subject Dark homogeneous subject
(1m from the front of the lens) (Note1)
Measurement Point Video terminal of A/V jack
Measuring Instrument Monitor TV
Specified Value Two or more hologram lines are
perfectly within the inspection frame.
The hologram lines can be seen at
every outside of the inspection frame.
Note1: Background paper (J-250-130-A) etc.. Perform this adjustment in
the dark place.
Note2: The data of page: 0, address: 10 must be "00".
Switch setting:
1) POWER ................................................................. MEMORY
2) NIGHT SHOT .................................................................. OFF
3) FOCUS .................................................................. MANUAL
Checking method:
Order Page Address Data
1 0 01 01
2 E EF 82
3 6 23 04
4 6 5B B4
5 6 5C B4
6 6 90 DB
7 6 91 02
8 6 92 C0
9 6 93 46
10 6 01 79
11 6 01 78
12
13
Processing after Completing Adjustments:
Order Page Address Data
1 E EF 00
2 6 23 00
3 6 5B 00
4 6 5C 00
5 6 90 00
6 6 91 00
7 6 92 00
8 6 93 00
9 6 01 00
10 0 01 00
Procedure
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Check that two or more
hologram lines are perfectly
within the inspection frame.
Check that the hologram lines
can be seen at every outside of
the inspection frame on the
monitor TV screen (the top, the
bottom, the left and the right).
Procedure
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data.
Set the data, and press PAUSE
button.
Set the data.
DCR-IP210/IP210E/IP220/IP220E
6-35
Inspection frame
Fig. 6-1-16.