P.t.o Shaft Cover And Shaft Cap - Kioti CK25 Manual

5-28 CK25/30
1. The tractor has a 540 rpm speed position.
2. P.T.O shifting needs clutch operation.
Press the clutch pedal down completely
to stop the tractor movement and any P.
T.O driven equipment movement before
shifting the P.T.O gear shift lever.
IMPORTANT
To avoid shock loads to the P.T.O,
reduce engine speed when engaging
the P.T.O, then open the throttle to
the recommended speed:
To avoid damage of transmission,
before shifting the P.T.O gear shift
lever, fully disengage the main
clutch.
Engine Speed P.T.O Speed
Model Shaft
min-1 (rpm)
CK25/30
2,646 6-Spline
NOTE
There is a P.T.O-1 (540 rpm) indicator
marked on the tachometer dial.
Tractor engine will not start if P.T.O
gear shift lever is in the engaged "ON"
position.

P.T.O SHAFT COVER AND SHAFT CAP

USA, AU
EU
min-1 (rpm)
540
(1) P.T.O Shaft Cover (2) P.T.O Shaft Cap
(A) Normal Position
The shield rotates upward, allowing for
easy implement attachment to the P.T.O
stub shaft.
You should keep the P.T.O cover in place
at all times and remember to replace the
cap when the P.T.O shaft is not in use.
704O544B
(B) Raised Position