Double Acting Lever; Connecting; Disconnecting - Kioti CK25 Manual

DOUBLE ACTING LEVER

(1) Double Acting Lever 1
(2) Double Acting Lever 2
(A) A PORT (C) C PORT
(B) B PORT (D) D PORT
Port
A In
Lever1
B Out
In
C
Lever2
D Out
Port A, B, C, D
Move the lever up or down and hold. This
will raise or lower the implement. Lever
will return to neutral when released.
IMPORTANT
Do not hold the lever in the "pull" Do not hold the lever in the "pull"
or "push" position once the remote or "push" position once the remote
704O708B cylinder has reached the end of the cylinder has reached the end of the
stroke, as this will cause oil to flow stroke, as this will cause oil to flow
through the relief valve. Forcing oil through the relief valve. Forcing oil
through the relief valve for extended through the relief valve for extended
periods will overheat the oil. periods will overheat the oil.
Pressure
Returning
To avoid personal injury:
Push Pull Pull
Out Out
In In
Out Out

CONNECTING

1. Clean both couplers.
In In
2. Remove dust plugs.
3. Insert the implement coupler to the trac-
Coupler Size
tor hydraulic coupler.
PT 1/2´´
4. Pull the implement coupler slightly to
make sure couplers are firmly
connected.

DISCONNECTING

1. Clean the couplers.
2. Relieve pressure by moving hydraulic
control levers with engine shut off. Pull
the hose straight from the hydraulic
coupler to release it.
3. Clean oil and dust from the coupler,
then replace the dust plugs.
HYDRAULIC UNIT 7-5
CAUTION
Stop the engine and relieve pres-
sure before connecting or discon-
necting lines.
Do not use your hand to check for
leaks.
NOTE
Your local KIOTI Dealer can supply
parts to adapt couplers to hydraulic
hoses.