Operating The P.t.o; Using 3-Point Hitch - Kioti CK25 Manual

1-10 CK25/30

OPERATING THE P.T.O

USA,
AU
EU
(1) P.T.O Shaft Cover (2) P.T.O Shaft Cap
1. Make sure the tractor is completely
stopped, gears are in neutral and all
moving components have completely
stopped before connecting,
disconnecting, adjusting, cleaning or
servicing any P.T.O driven equipment.
2. Keep the P.T.O shaft cover in place at
all times. Replace the P.T.O shaft cap
when the shaft is not in use.
704O121B
3. Before installing or using P.T.O driven
equipment, read the maunfacturer's
manual and review the safety labels
attached to the equipment.
4. When operating stationary P.T.O
driven equipment, always apply the
tractor parking brake and place chocks
behind and in front of the rear wheels.
Stay clear of all rotating parts.

USING 3-POINT HITCH

704O122A
(1) 3-point hitch lowering speed knob
(A) "FAST"
(B) "SLOW"
1. Use the 3-point hitch only with equip-
ment designed for 3-point hitch usage.
2. When using a 3-point hitch mounted
implement, be sure to install the proper
counterbalance weight on the front of
the tractor.
3. When transporting on the road, set the
implement lowering control in the
"LOCK" position to hold the implement
in the raised position.
704O123B
(C) "LOCK"