Removal And Installation Of 3-Point Hitch Implement (With Pto Shaft); Removal And Installation Of 3-Point Hitch Implement (With Pto Shaft) - Kioti DS4110 Manual

6 6
  ds4110(hs) / ds4510(hs) ds4110(hs) / ds4510(hs)
- -
Removal and installation of 3-point
hitch implement (with pto shaft)
(1) Implement support (2) Implement pin
1. place implement on the level
ground.
2. drive the tractor backward to
move as close as possible to an
implement (approx. 5 cm). then,
adjust the height of the lower link
to be parallel to the pins of the im-
plement.
3. put all the shift levers in the neu-
tral position.
M50-EU-06.indd 2
H61O608b
(1) check Link
4. Lengthen the chain by turning the
check link turn buckle.
H61O601A
(2) turn buckle (1) turn buckle
(3) Lower Link
(5) Lynch pin
5. first install the left lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely.
6. Install the right lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely .
H61O615A
(2) Lift Rod (Rh)
(4) Implement pin
2009-09-15 오전 9:51:02