Checking Coolant Level; Checking Brake And Clutch Pedals - Kioti CK25 Manual

10-6 CK25/30

CHECKING COOLANT LEVEL

(1) Recovery Tank
(A) FULL (B) LOW
CAUTION
To avoid personal injury:
Do not remove radiator cap while
coolant is hot. When cool, slowly
rotate cap to the first stop and al-
low sufficient time for excess pres-
sure to escape before removing the
cap completely.
1. Check to see that the coolant level is
between the "FULL" and "LOW" marks
of recovery tank.
2. When the coolant level drops due to
evaporation, add water only up to the
full level.
In case of leakage, add anti-freeze and
water in the specified mixing ratio up
to the full level.
(See "Flush Cooling System and
Changing Coolant" in every 2 years
maintenance.)
704OA07A
IMPORTANT
If the radiator cap has to be removed,
follow the caution above and securely
retighten the cap.
Use clean, fresh water and anti-
freeze to fill the recovery tank.
If water should leak, consult your
local KIOTI dealer.
CHECKING BRAKE AND CLUTCH
PEDALS
1. The brake and clutch pedals should be
inspected for free travel, and smooth
operation.
2. You should adjust these pedals if an
incorrect measurement is found. (See
"adjusting clutch and brake pedals" in
the 100 hour maintenance schedule.)
NOTE
Brake pedals should be equal when
depressed.