Table of Contents
Advertisement
INTRODUCTION AND SAFETY INFORMATION
Understanding Safety
Statements
You will find various types of safety information on the
following pages and on the machine signs (decals)
attached to the vehicle. This section explains their
meaning.
The Safety Alert Symbol means ATTENTION! YOUR
SAFETY IS INVOLVED!
NOTE
Means that failure to follow these instructions could
cause damage to the equipment or cause it to operate
improperly.
Special notice - read and thoroughly understand.
CAUTION
Caution means serious equipment or other
property damage can occur if instructions on this
label are not properly followed.
WARNING
Warning means serious injury or death can occur
if safety measures or instructions on this label
are not properly followed.
DANGER
Danger means a life-threatening situation exists.
Death can occur if safety measures or
instructions on this label are not properly
followed.
NOTE
Make sure you read and understand the information
contained in this manual and on the machine signs
(decals) before you attempt to operate or maintain this
vehicle.
The safety statements contained in this manual relate to
the operation of the Model 2512 Rigid & Folding In-Row
Ripper.
1-2
TABLE OF CONTENTS
Decal Safety
1. Examine safety decals and be sure you have the
correct safety decals for the implement.
2. Keep these signs clean so they can be observed
readily. It is important to keep these decals cleaned
more frequently than the implement. Wash with soap
and water or a cleaning solution as required.
3. Replace decals that become damaged or lost. Also,
be sure that any new implement components
installed during repair include decals which are
assigned to them by the manufacturer.
4. When applying decals to the implement, be sure to
clean the surface to remove any dirt or residue.
Where possible, sign placement should protect the
sign from abrasion, damage, or obstruction from
mud, dirt, oil etc.
F-1040-0320
Advertisement
Table of Contents
