Table of Contents
Advertisement
Attaching to Three-Point Hitch
1. Carefully back the tractor into place.
2. Attach the In-Row Ripper to the tractor.
3. For tractors equipped with Quick Hitches:
a. Attach quick hitch to the In-Row Ripper
b. Raise and make sure lower pin locks are
secured.
c. Raise the parking stand and pin in fully up
position.
d. When disconnecting the In-Row Ripper, adjust
stands to leave the tool bar tilted slightly forward.
This will permit easier disconnecting and
reattaching.
1. For tractors not equipped with Quick Hitch:
a. Attach lower lift arms of the tractor to the In Line
Ripper utilizing appropriate pins. 2512 Rigid
Model come with either Category IIIN, CAT III,
and CAT IVN. 2512 Folding Models come with
CAT IVN ONLY.
(See Figure 4-1)
b. Attach top link after connecting lower lift arms.
Raise parking stands into clamps or remove.
When disconnecting, place stand so that the In
Line Ripper is stable.
1. Reinstall the stabilizer bars or sway blocks before
transporting
CAUTION
Do not move tractor without making sure top
hitch is connected to tractor.
TABLE OF CONTENTS
Attaching to Caddy
If you will be attaching the In-Row-Ripper to a Caddy:
1. Carefully back the Caddy up to the In-Row-Ripper.
2. Attach the lower links of the caddy to the in line ripper
first.
3. When the lower links have been secured, extend or
retract the upper link of the Caddy using the
hydraulic upper link. Attach the upper link of the
caddy to the In line Ripper
OPERATION AND MAINTENANCE
4-3
Advertisement
Table of Contents
